A big blog of ideas
The technology is finally here for foldable display. Flexible screens can be bent and rolled, allowing the design of products like the rollable TV LG65RX shown in the video blow. Another type of device rumored to have rollable display is mobile phones. Taking inspiration from the TV and having a decent understanding in mobile...
Most additive manufacturing methods were designed for small scale prototype parts, but today the industry research is pushing towards larger scale manufacturing and stronger parts. Full scale cars and furniture have been printed with the constant challenge or time reduction and increased strength....
More than ten years of hype About the 3D printing Technology ,and it still faces the same Problems.Those Problems include , slow process, limited build volume, and reduced accuracy for larger parts.(properly named additive manufacturing) The most common desk technology is the fused deposition manufacturing (FDM), this technology uses a plastic filament that is...
Elevators have been around for hundreds of years moving cargo up and down. Safety elevators were introduced in 1852 by Elisha Otis which made it safer for people to use elevators. Since then the Elevator design has not changed too much until the recent magnetic technology demonstrated by thyssenkrupp Elevators called “Multi”. Multi is...
You might be familiar with flip-disk display (The top yellow bus number in the picture) as you probably have seen it in many places, though you might not be familiar with the technology name, how it works and what it is made of. Source: Wikimedia Flip disk display consists of flat plates with a different...
This is an article about VWE a new extruder technology concept that aims to increase build speed , quality and strength in a 3D printer. VWE stands for variable width extruder, it practically is a change in the method a plastic film is deposited on the print bed and layers are stacked. All standard FFD...
Maybe when you hear lighter than air, the first thing that comes to mind would be a Zeppelin or an Aerogel. Well, a Zeppelin is lighter than air when the gas inside has a lower density and is trapped in a flexible membrane. The Zeppelin is not a solid. Aerogel is one example of...
Our goal was to design and print a part that could be expanded to a larger size. VoXup allows the designer to print a small part based on voxels and scale it up! In a 2D world shapes and geometries are formed with units of pixels. In the 3D CAD world, the unit is...